How to Apply Wood Veneer to Plywood

Applying wood veneer can transform plain plywood into a beautiful, high-end looking surface. Here’s an easy step-by-step process to help you get professional results:

Check out our Plywood Products

Materials You’ll Need:

• Wood veneer sheets
• Plywood base
• Contact cement
• Roller or brayer
• Sharp utility knife
• Sanding block
• Protective gloves
• Clean cloth
• Veneer saw or sharp scissors

How to Make Kitchen Cabinets with Plywood

Simple Steps to Apply Wood Veneer:

Prepare the plywood surface by sanding it smooth and clean, ensuring it’s completely dust-free and flat. Apply a thin, even layer of contact cement to both the plywood surface and the back of the veneer sheet.

Let the cement dry for about 15-20 minutes until it becomes tacky but doesn’t stick to your finger.

How to Bend Plywood

Carefully position the veneer, starting from one edge and slowly rolling it down to avoid air bubbles. Use a roller to press the veneer firmly, working from the center outwards.

Trim excess edges with a sharp utility knife, using a metal straightedge as a guide. Sand the edges lightly for a smooth finish, and apply a clear protective coat to seal and protect your new veneer surface.

Pro Tips:

• Work in a well-ventilated area
• Take your time positioning the veneer
• Use even pressure when rolling
• Practice on scrap wood first

Potential Challenges: Some veneers can be tricky to work with, and bubbles or wrinkles can form if you’re not careful. Go slowly and be patient with the process.

Contactez-nous to get plywood for your next project